This Glow in the Dark tape is made from a flexible polyester laminated photoluminescent film coated with a permanent acrylic pressure-sensitive adhesive and backed with a 5 mil poly coated release liner. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness, the tape is immediately visible. These tapes are a non-electric safety system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards. Tape will glow in total darkness after exposure to artificial or natural light - it is fully charged within 30 minutes. Glows brightest the first 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adapted eye for 10+ hours. These tapes are screen printable. They can also be die-cut and kiss cut using steel rule dies. 3 in neutral paper cores.
Used for identification of critical equipment controls, light switch covers, exit and directional signage - especially for escape routes and stairways. Tape clearly labels safety equipment and provides a safe, illuminated path through stairwells, halls, rooms, and other potentially hazardous areas. Simple and inexpensive to install just position, peel off backing, and adhere. This safety system requires virtually no maintenance. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants - wherever people need a safe, reliable high and low-level lighted pathway in case of an emergency, such as power outages or the spread of smoke. This product has excellent resistance to UV light and does not show significant degradation when used outdoors. Also used for labels, decals, novelties, sporting goods, trims, special effects, or anything else you can think of. (Great alternative to Jessup No. 7530) Sold by the Case.
Sizes: 1/2 in (12.5mm) x 150 ft Case of 72 Rolls, 3/4 in (19mm) x 150 ft Case of 48 Rolls, 1 in (25mm) x 150 ft Case of 36 Rolls, 1.5 in (38mm) x 150 ft Case of 24 Rolls, 2 in (50mm) x 150 ft Case of 18 Rolls, 3 in (75mm) x150 ft Case of 12 Rolls, 4 in (100mm) x 150 ft Case of 8 Rolls, 54 in (1372mm) x 150 ft One Log Roll.
Color: Light Green
Nominal Thickness ( film/adhesive) : 10 mil +/- 10 percent
Release Liner Thickness: 5 mil
Adhesive Type: Solvent based Acrylic
Adhesion to SST: 72 oz/inch - 24 hour dwell
Shear Adhesion to SST: > 24 hours
(1/2 in x 1/2 in, 500 grams)
Minimum application temperature: 50 degrees F
UV stability: Excellent
Glow properties of PGD-10: 10+ hours
-DIN 67510 Xe Lamp; 1000 Lx/5min. (time span necessary for afterglow brightness to diminish to 0.32 mcd/m2 - 100X human eye perception)
This product is available for specialty screen printing, die cutting and kiss cutting. Please call us at (1-866-284-1541) for special orders.