ecommerce provided by Yahoo! Small Business Order Status
Live chat by BoldChat
Floor Tape Search

Instant SSL Certificate Secure Site
Instant SSL Certificate Secured

Stop Painting is upfront

Pronto Top Seller - Tools & Hardware
Home > Parking Speed Bumps > Easy Rider Speed Bump

Easy Rider Speed Bumps install easily and require no maintenance!

Back I Up I Next
Easy Rider Speed Bump

Easy Rider Speed Bump


Easy Rider Speed Bumps Will Calm Traffic Without Vehicle Damage

Made from 100% recycled rubber our Easy Rider Speed Bump is 4' long and is striped with yellow reflective lines. Each Bump is 12 inches wide and 2.25 inches thick (high). Multiple bumps can fit together to cover any width road. These versitile speed bumps can be permanent or temporary depending on your needs. The reflective tape is sure to alert drivers of the bump, and the recycled rubber provides an environmentally friendly long lasting bump that will save you a bundle!

Dimensions: 48" long x 12" wide x 2.25" thick

Hardware: Includes (3) 14" spikes

Easy Rider Speed Bumps Are

  • Eco-friendly--made from 100% recycled rubber
  • Durable and long lasting, therefore cost effective
  • Typically reduces vehicle speed to 2-5 mph
  • Highly visibile at night
  • Easy to Install
  • Easy Rider Speed Bumps can be installed in sections to create varying lengths
  • Will not warp, crack, chip or rot
  • Can be installed on any road surface
  • Resistant to UV rays, oil, water, and extreme temperatures
  • Can be installed temporarily or permanently - Relocatable when resurfacing / maintaining road surfaces; speed bumps can be stored and reused.
  • Channeled bottom for cabling and piping
  • Lowers insurance premiums for parking lot owners
  • Maintenance free
  • All Easy Rider Speed Bumps come with a 3 year warranty!

Easy Rider Speed Bumps have been used throughout the country in various locations such as hotels, shopping centers, universities, churches, etc. Easy rider speed bumps have been used by the US Army Corps of Engineers, Walmart, Lowe's Best Western, the United Postal Service, and many more satisfied customers!

(Please note: You will need to call or email if you would like a shipping quote prior to ordering. Checkout will not show shipping costs.)

Don’t forget to add visibility by selecting the appropriate speed bump signs to your selected traffic calming system.

Download our flyer about Speed Bumps

Download our flyer about Speed Bumps

Q: Do I need a city permit to install a speed bump in a residential area?

A: Every city, town, and municipality has different regulations. If outside the city limits, check with the county. If the neighborhood is governed by a home owners association, you will need to get approval from their Board to install the speed bump. In most cases, speed bumps create safer roads, and are approved without a problem.

Q: What's the difference between a speed bump and a speed hump?

A: A speed hump is wider than a speed bump and slows the traffic to 10-16 mph. A speed bump has a steeper grade that requires vehicles to slow to 2-5 mph.

Q: Can speed bumps be installed on concrete?

A: Speed bumps can be installed on concrete, asphalt, or any paved surface. There are different fasteners and installation methods depending on the surface.

Q: What is the difference between the recycled plastic and recycled rubber curbs/speed bumps?

A: The difference is mainly the material that they are made from. The plastic curbs bumps are 100% recycled high density polyethylene. The rubber curbs and bumps are made from 100% recycled rubber.

Q: How are the Easy Rider Speed Bumps installed temporarily/permanently?

A: As this product is installed differently depending on the surface that it is being installed on, please see below for instructions on asphalt installation/removal and concrete installation/removal.

    Asphalt Installation: (14" Spike)

  • Place the speed bump where you intend it to go, drill 1/2" holes 3-4" in depth through the holes in the speed bump
  • Drive 1/2" rebar spike (14" long) through the holes of the product
  • Asphalt Removal:

  • Place pry bar underneath the edge of the speed bump near the spike and carefully lift up to remove the speed bump
  • Concrete Installation: (lag bolts/screws & metal shield)

  • Place the speed bump where you intend it to go, drill 1/2" holes 3-4" in depth through the holes in the speed bump
  • Remove the product, redrill holes for the diameter and depth required by the metal shields
  • Install the metal shields, re-position the product and secure with lag bolts
  • Concrete Removal:

  • Remove the lag bolts and place pry bar underneath the edge of the speed bump near the spike and carefully lift up to remove the speed bump

If you have any further questions please feel free to contact us via email or by phone at 866-284-1541.

Protected by Copyscape Online Copyright Checker

© 2001-2008 Insite Solutions. All Rights Reserved Privacy Policy by TRUSTe Privacy Policy

Easy Rider Speed Bump