Please Note: We have a minimum order requirement for this item of $100.00. You can combine other measurement items found in this section to meet the minimum. Thank you.The Lazer Cat- Compact Alignment Tool can be used for quickly measuring or setting two or more surfaces parallel to the same plane , or even offsetting them to a given dimension. Both laser head and target have strong magnetic bases for use in vertical applications with ferrous components, and each has a compact footprint to help fit into physically tight spot. Alignment of each laser beam is easily accomplished by literally twisting the stub tail-base nut- of the Laser Cat to help aim the beam across to the target. The beam is factory aligned to a calibration of +-.060 @100 feet to the center of it companion target.The Lazer Cat is provided with a bubble vial for when it is important for leveling purposes. How to Operate :
- Remove Laser Cat metal caps from magnets then place target and laser head on parts to be measured with target face perpendicular to laser beam projection.
- Turn laser ON and fine tune aim until the red dot is aligned near the vertical center of the target. For extended lengths between parts a backup sheet behind the target is helpful.
- Should adjustment between the two parts be required loosen the respective part, reposition to appropriate target mark, then retighten.You are now on Target.
- Turn off laser and plase Laser Cat metal caps back on magnets. This is done to maintain magnet strength .
