null

Parking Lot Striping Tape

$410.26 - $1,325.35
SKU:
parkinglotstripingtape

Try pavement striping tape and see how easy it is to mark parking lots without paint.

Painting is messy, requires a lot of equipment, and does not last very long compared to parking lot tape. Striping tape also involves no downtime—when painting lots, the area is closed while the paint dries. Striping tape eliminates this downtime.

Our pavement marking tape is designed to mark asphalt or concrete parking lots. Our 4" x 150' parking lot striping tape is reflective, anti-skid, and comes in two highly visible colors. It’s also easy to install and requires no special equipment. Pavement marking tape is typically 15 times thicker than normal parking lot paint and features an aggressive, anti-slip, top coating which prevents accidents. The proprietary adhesive and reflective top coating ensure that the lines will remain in place and be highly visible for years.

Easy 4 Step Installation:

  1. SWEEP
  2. PRIME
  3. APPLY TAPE
  4. TAMP

Notes on primer application: Primer (sold separately) should be applied in a thin coat, allowed to dry for approximately five minutes, until tacky to the touch. Can be applied with a roller or brush, with excess primer removed from the brush before application. One gallon of primer is necessary for every 200 square feet of tape. One roll of 4" x 150' Parking Lot Striping Tape covers 50 square feet so one gallon of primer is sufficient for approximately 4 rolls of tape.  

Installation Recommendations: For best results in permanent applications, use our primer to adhere tape to pavement. 

Size: 4" wide by 150 feet long. Other sizes available upon request.
Colors: Available in white, yellow, red, and blue. Other colors available upon request. *Please note, red and blue are specialty colors, please call our office for current availability.
Features: Reflective, anti-slip top coating and proprietary adhesive system.