Note: Glow in the dark floor tapes are not eligible for return.
For greater safety in dark rooms or stairwells without the need for more expensive electric lights, use Glow in the Dark tape. Its flexible polyester laminated photo-luminescent film absorbs and stores natural or artificial light energy and the tape will become immediately visible in complete darkness. This PGD-6 glow in dark tape has a 5 mil poly coated release liner, and the permanent acrylic pressure sensitive adhesive makes it easy to apply. This glow in total darkness tape sticks securely to many different surfaces. You'll see the brightest glow in the first 30 minutes after light activation has ended, but the tape will remain clearly visible in complete darkness for 6 or more hours. Purchase this glow in the dark tape in case lots for a great value. See the full line of reflective tapesavailable at Stop-Painting.com. For a higher-strength, premium tape that can handle any situation, consider our exceptional Superior Mark floor tapes.
These tapes are screen printable. They can also be die-cut and kiss cut using steel rule dies. 3 in neutral paper cores.
Used for identification of critical equipment controls, light switch covers, exit and directional signage - especially for escape routes and stairways. Tape clearly labels safety equipment and provides a safe, illuminated path through stairwells, halls, rooms, and other potentially hazardous areas. Simple and inexpensive to install just position, peel off backing, and adhere. This safety system requires virtually no maintenance. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants - wherever people need a safe, reliable high and low-level lighted pathway in case of an emergency, such as power outages or the spread of smoke. This product has excellent resistance to UV light and does not show significant degradation when used outdoors. Also used for labels, decals, novelties, sporting goods, trims, special effects, or anything else you can think of. (Great alternative to Jessup No. 7520)
Color: Light Green
Nominal Thickness ( film/adhesive) : 10 mil +/- 10 percent
Release Liner Thickness: 5 mil
Adhesive Type: Solvent based Acrylic
Adhesion to SST: 72 oz/inch - 24 hour dwell
Shear Adhesion to SST: > 24 hours
(1/2 in x 1/2 in, 500 grams)
Minimum application temperature: 50 degrees F
UV stability: Excellent
Glow properties of PGD-6: 6+ hours
-DIN 67510 Xe Lamp; 1000 Lx/5min. (time span necessary for afterglow brightness to diminish to 0.32 mcd/m2 - 100X human eye perception)
This product is available for specialty screen printing, die cutting and kiss cutting. Please call us at (1-866-284-1541) for special orders. Please note that orders under $100 will have a $15 handling fee added to shipping costs at checkout.