Glow in the dark anti-slip tape is superb for stairways and walkways where safety goes beyond just slip resistance and requires a product to mark the boundaries of the surface it is applied to when there is little to no lighting available. It provides a safe walkway for people who need this area to work in or exit from when lighting is insufficient or completely absent. Our NiteGlow anti-slip tape provides exceptional luminescence for six hours. The tape can be recharged in as little as 30 minutes by either natural or incandescent light.
This page also includes our Ocean Gray colored anti-slip tape as it is the same price as the NiteGlow
Benefits
- Cuts the risk of slips or falls from any direction
- Luminescent to provide safety even in dimly lit environments
- Reduces liability exposure
- Quick and easy to install
- Economical
- Resistant to solvents
- Highly durable
- Superior adhesion
Available widths of Rolls:
- 3/4 inch
- 1 inch
- 2 inch
- 3 inch
- 4 inch
- 6 inch
- 8 inch
- 12 inch
- 18 inch
- 24 inch
Length: All rolls of Anti Slip Tape measure 60 feet long.
Composition
Our anti-slip tape consists of a uniform closed coat of near diamond-hard abrasive grit of variable sizes to be utilized for many different applications. It is securely bonded to a polymer substrate with a flexible polymeric binder in sufficient thickness to achieve optimum bond and grit exposure. The underside features a special pressure-sensitive adhesive designed to aggressively adhere to practically any clean, dry surface.
Application
For the best results, the surface must be clean and dry, with a minimum surface temperature of 50° F. Anti-slip tapes cannot be successfully applied over loose or caked dirt, gravel, oily residues, road salt residues, or other foreign substances as these will interfere with proper bonding. Simply remove the protective liner and place the tape in proper alignment. Use foot pressure, a roller, or soft rubber mallet to bond the tape in place. Please review the manufacturer's application instructions for more detailed information. Allow a minimum of 30 minutes for the tape to charge for maximum brightness.
Primary Uses
- Provided luminescent outlines of egress stairs
- Evacuation safety, especially in high rise buildings
- Illuminating stair treads
- Safety in the event of a power outage
Also called: anti-skid, non-slip, slip-resistant and grit tape
Please note that Ocean Gray is not a photoluminescent tape.
