Reflective Tape Engineering Grade 150 ft. Length

Specifically made for permanent and temporary traffic signage, this engineering grade reflective tape can also be used for a wide range of other applications. It's constructed from 5.5-mil thick enclosed lens retroreflective urethane film coat with a permanent acrylic adhesive, making it corrosion-resistant and great for use in environments that need an extra layer of surface hardness. It should be applied in temperatures above 40 degrees F on clean, dry and flat surfaces. This top-quality engineering tape can be ordered in eight size options at Stop Painting to help meet the needs of your unique job.

Engineering Grade Reflective Tape, 7 year durability. 5.5 mil 0.14mm thickness. This tape has an enclosed lens retroreflective urethane film coat, which protects the glass beads from being exposed to air, with a permanent acrylic adhesive. 94 lbs paperweight release liner. Meets or exceeds requirements of Federal Specification LS-300C (Reflectivity 1, Class 1), FP-85 (Type ll), and ASTM D4956-94 (Type 1).

Primarily designed for permanent and temporary traffic signage. Application surface should be flat, dry, and clear of debris, with a temperature above 40 degrees F, (not recommended for unpainted stainless steel surface). 

Solid Color: Yellow

Size: 3 in (75mm) x150 ft Pack of 1 Roll.

Physical Properties:

• Aluminum alloys are anodized to increase corrosion resistance, increase surface hardness, improved adhesion, and to allow dyeing.
• Application temperature should be above 40 degree F (4 degree C)
• Service temperature range is -40 degree F to +180 degree F (-40 degree C to 82 degree C)
• Dimensional stability is less than 0.02 in. (0.8mm) shrinkage.
  (1000 hours Atlas Twin Arch Weatherometer, EH).

For a heavy-duty tape that can handle any use, no matter how demanding, trust the Superior Mark line.

Please call 1-866-284-1541 to inquire about additional options for this product.