This tape has an enclosed lens retroreflective urethane film coat, which protects the glass beads from being exposed to air, with a permanent acrylic adhesive. 94 lbs paperweight release liner. Meets or exceeds requirements of Federal Specification LS-300C (Reflectivity 1, Class 1), FP-85 (Type ll), and ASTM D4956-94 (Type 1).
Primarily designed for permanent and temporary traffic signage. Application surface should be flat, dry, and clear of debris, with a temperature above 40 degrees F, (not recommended for unpainted stainless steel surface). Product may be screen printed, guillotine cut, die-cut, or thermal kiss-cut (300 degree F to 325 degree F for 1 to 2 seconds). 3 in neutral paper core. This is a great alternative to Avery T-1500 series, Nippon/Carbide 8100 series, or 3M 3200 series.
You can order engineering-grade reflective tape in large quantities at Stop Painting. We carry this 5.5-mil thick, corrosion-resistant reflective tape in six to 24 rolls for your convenience. We also provide reflective tape log rolls measuring 48 inches by 150 feet and 48 inches by 750 feet to give you the exact amount you need for your precise job. Available rolls range in size from 1/2-inch by 150-foot to 6-inch by 150-foot, plus log roll sizes. Because this high-quality tape can be used as traffic tape, especially for traffic signage, these large orders are convenient for both municipalities and private property owners. Each roll contains immensely durable 5.5-mil reflective tape made with innovative materials.
This product is available for screen printing, guillotine cutting, die cutting, and kiss cutting.
For a tape designed to withstand the most demanding uses, consider Superior Mark tape.
Please call us at (1-866-284-1541) for special orders.