Superior Mark Sign

Beveled edges
Peel-and-stick adhesive
Applies to smooth surfaces
Replace sections

vinyl floor sign

Vinyl Floor Sign

Anti-skid overlaminate
Peel-and-stick adhesive
Applies to smooth surfaces

rubber sign with urethane coating

Rubber Floor Sign

Reinforced substrate rubber
Superior butyl adhesive
Applies to irregular surfaces

inlaid mesh with permanent epoxy adhesive

Inlaid Mesh Floor Sign

Tough mesh fabric
Embeds with liquid adhesive
Applies to irregular surfaces

Superior Mark® Adhesive Remover

$30.76 - $24,871.68

InSite Solutions Adhesive Remover

When preparing your industrial floor for a new installation of floor marking tape, you will want to have the cleanest surface possible. This could very well mean you'll be looking for anti-adhesive solutions. If you've used standard vinyl floor tape in the past, the adhesive residue might be very difficult to remove. Just a squirt of our InSite Solutions Adhesive Remover will make your job much easier. Although it's tough on old adhesive, it's easy on the environment, as it's made from soybeans. This adhesive tape solution will also get rid of ink and over-spray.

This product is guaranteed to be free from defects with normal usage. We are not responsible for damages if used incorrectly.


Floor Cleaning Products Comparison Chart 
Main Purpose
Application Recommendations
InSite Solutions Floor Degreaser
Removes grease, oil, dirt, etc. from floor surface.
For light to medium soils - Add 4 ounces per gallon of water. For heavy soils and floor machine application - Mix one part to one part water for tough to remove
Mild: for cleaning surface grease and dirt
InSite Solutions Adhesive Remover
Removes adhesive without removing floor coatings.
Spray on the surface. Let sit for 1-2 minutes.
Medium: will remove adhesive residue but not paint and epoxy coating
InSite Solutions Paint Remover
Stripping floors of all paints, coatings, and adhesives to get down to a bare concrete surface.
Apply a thick layer to the coating to be removed by pouring, brushing or airless sprayer. If applying by brush do not apply as you would paint. Lay on a thick even layer up to 1/8 of an inch.
Extremely Strong! Removes sealer, acrylics, enamel, latex, urethane, and polyurethane coatings

Printable Docs+
Video +

Superior Mark® Patent No. 8,883,290 and Patent No. 10,214,664.