Cases of Reflective Tape Engineering Grade 30 ft. Length

If you're looking for an engineering grade reflective tape that meets with federal guidelines, this long-lasting tape fits the bill.

It's made with an enclosed lens retro-reflective urethane film coat that protects the reflective glass beads from exposure to air, a permanent acrylic adhesive and 94 pounds paperweight release liner. This tape is a comparable alternative to the 3M reflective 3200 series. If you're looking for 3M orange reflective tape, this reflective tape is available in several colors that include red and orange. Stop-Painting.com also offers other types of reflective tapes. Meets or exceeds requirements of Federal Specification LS-300C (Reflectivity 1, Class 1), FP-85 (Type ll), and ASTM D4956-94 (Type 1).

Primarily designed for permanent and temporary traffic signage. Application surface should be flat, dry, and clear of debris, with a temperature above 40 degrees F, (not recommended for unpainted stainless steel surface). Product may be screen printed, guillotine cut, die-cut, or thermal kiss-cut (300 degree F to 325 degree F for 1 to 2 seconds). 3 in neutral paper core. This is a great alternative to Avery T-1500 series, Nippon/Carbide 8100 series, or 3M 3200 series.

Sold by the Case.

Physical Properties:

• Aluminum alloys are anodized to increase corrosion resistance, increase surface hardness, improved adhesion, and to allow dyeing.
• Application temperature should be above 40 degree F (4 degree C)
• Service temperature range is -40 degree F to +180 degree F (-40 degree C to 82 degree C)
• Dimensional stability is less than 0.02 in. (0.8mm) shrinkage.
• (1000 hours Atlas Twin Arch Weatherometer, EH).

This product is available for screen printing, guillotine cutting, die cutting, and kiss cutting. Please call us at (1-866-284-1541) for special orders.